1. When you drive through a construction zone, you should: Slow down to watch the workers. Decrease your following distance.
...
If a traffic signal light is not working, you must:

1. Stop, then proceed when safe.
2. Stop before entering the intersection and let all other traffic go first.
3. Slow down or stop, only if necessary.

What 3 things should you do when entering a construction zone?

1. Increase Your Following Distance. ...
2. Don't Assume Workers Aren't Present. ...
3. Follow Instructions From Flaggers. ...
4. Minimize Your Distractions. ...
5. Merge Promptly at Lane Closures.

How do you handle construction zone?

1. Minimize all your distractions. ...
2. Pay attention to brake lights. ...
3. Pay close attention to all relevant signs, and be alert to construction workers who may have instructions for you as you move through the area.
4. Slow down. ...
5. Merge properly. ...
6. Be aware of workers' presence on and off the side of the road.

When working on or near a construction zone you should?

Federal guidelines recommend a speed of between 45 and 55 miles per hour around highway construction zones.
...
Tips for Driving in Construction Zones

1. Stay focused. ...
2. Don't slam on your brakes. ...
3. Avoid lane switching. ...
4. Follow the construction zone speed limit. ...
5. Drive with the flow of traffic.

What should a driver do when approaching a construction site?

Slow down, stop all wireless telephone communications, and yield the right-of-way. C. Honk their horn several times to alert individuals working in the area to their presence.

60 Second Driver - Construction Zones

What should you be alert for in a construction area?

Watch for brake lights, and be alert to the possibility that trucks and other vehicles might be pulling out of the work zone and onto the roadway. Obey the posted speed limit, and remember that fines are often doubled for traffic violations in a construction zone.

What is considered a construction zone?

Page 1. Work/Construction Zones. Page 1 of 2. A work zone is an area where roadwork takes place and may involve lane closures, detours and moving equipment.

Why is work zone safety important?

Protection must be detectable by pedestrians with a vision impairment. If there are hazards that require protection, such as trenches, holes or falling debris within the workspace, it is even more important to prevent pedestrians from entering or walking across the work area.

What is a work zone?

An on-street works zone, sometimes known as a construction loading zone, is a section of road where vehicles involved in construction work can stop.

What are the five zones of a construction area?

The temporary traffic control zone generally has five sections: the advanced warning area, the transition area, the buffer area, the work area, and the termination area.

What safety precautions do you think someone should take in construction zones?

• Properly Control Traffic. ...
• Create Separate Work Areas. ...
• Wear Proper Safety Equipment. ...
• Be Aware of Your Surroundings. ...
• Avoid Blind Spots. ...
• Have a Competent Person on Hand. ...
• Start Each Workday with a Safety Meeting. ...
• Have a Site Specific Safety Program.

What is work zone safety?

Work Zones are designed to allow individual workers to have a space in which they can confidently undertake their work in a safe environment. Your work zone may move and change shape as you undertake different tasks around the work site.

What rules should be followed when going on the road?

• Always wear a seatbelt.
• Avoid distractions.
• Do not cross the speed limits.
• Service your car regularly.
• Follow traffic signals.
• Maintain lane discipline.
• Be careful during bad weather.
• Maintain a safe distance.

What are two problems you could have in a construction zone?

According to the Centers for Disease Control and Prevention, the two largest hazards in construction zones are the passing of motor vehicle traffic on the outside of the construction zone that collides with equipment or other vehicles and injury to workers during the movement of construction vehicles and equipment ...

What should you do when you are going to enter a roadway from a private road?

When entering a roadway from a driveway or private road, you must yield the right-of-way to pedestrians and traffic on the roadway.

What are some things you can do to become a safe driver?

Share the driving over long distances, and take frequent breaks – at least every two hours. Try not to drive if you are feeling unwell. If it cannot be avoided, try to drive when there are fewer cars on the road, be especially alert, and try to use routes that use traffic lights. Keep left unless over overtaking.

Is work zone one or two words?

An area where work is being done. (more specifically) A segment of road along which road construction is being done.

What is the basic speed rule?

The Basic Speed Law states that you must never drive faster than is safe for present conditions, regardless of the posted speed limit.

What is the most common collision in a work zone?

Rear-end crashes (running into the rear of a slowing or stopping vehicle) are the most common type of work zone crash. Fatal work zone crashes occur most often in summer and fall. The majority of fatal work zone crashes occurred on roads with speed limits greater than 50 mph.

When driving in work zones What should a driver do?

Obey all warning signs, traffic control devices and posted speed limits within the zone. Avoid changing lanes, look well ahead, and be ready for sudden stops.

When driving through a work zone it is good safety practice to?

Double your usual following distance. The most common type of crash in work zones is the rear-end collision. To avoid this hazard, it is recommended that you double your following distance as you approach a work zone.

How often do work zone crashes occur in the US?

In the US, one work zone fatality occurs for every 4 billion vehicle-miles of travel¹ and for every $112 million worth of roadway construction expenditures. Work Zone Fatalities. Between 2018 and 2019, fatal crashes in work zones increased by 11 percent while fatal crashes outside of work zones decreased by 2 percent.

What are construction zone signs?

Construction zones can be defined as an area marked with traffic control devices such as signage or pylons. These markings will be seen at the beginning and end of the zone. There may be a flag person or traffic control person to help direct the flow of traffic.

How are working zones identified?

A work zone is typically marked by signs, channeling devices, barriers, pavement markings, and/or work vehicles. It extends from the first warning sign or flashing lights on a vehicle to the "End of Road Work" sign or the last traffic control device.

What's classed as construction?

Construction involves designing and building the 'built' environment around us: not only skyscrapers, football stadiums and bridges, but also houses, factories, hospitals, schools, railways, tunnels, piers, dams, coastal defences and energy generation plants.