Hume offers an extensive range of doors designed and manufactured to meet the specific regulatory requirements of building in designated bushfire zones. ... Select from either tempered hardboard or veneer finished solicore doors with 6mm tempered safety glass.

Are Hume doors solid?

This product is as it sounds, solid on the inside, filled with a pine blockboard core. The solid blockboard material means it can be cut to any size – making it a fantastic solution for those tricky, uneven doorways.

Are Hume doors Australian made?

Our Values

To this day, the Hume Group remains a 100% Australian owned family company and encompasses the values set forth by Don Buckley himself: family, trust, teamwork, great engineering and safe reliable manufacturing.

Are Hume doors pre primed?

All of our products use natural timber. ... Trials have shown timber primed and protected by the method laid out in the distributor's instructions outlast and perform better than those sealed inadequately.

How do you hang a Hume door?

1. Measure your opening.
2. Transfer all measurements to the door. Place your door on workbench & remove all packaging. ...
3. Place door in door jamb. ...
4. Mark the hinge position. ...
5. Chisel out for the hinges. ...
6. Fit door hinges. ...
7. Seal your door. ...
8. Place door in jamb.

How to change an existing door

How much can you shave off an internal door?

How Much Can You Trim off a Hollow Core Door? Removing an inch or so from a hollow core door to allow for a thicker carpet, misread tape measure or wonky doorframe will be fine. However, cut off too much – roughly over 2 inches – and you may notice that the edge of the door is no longer solid.

How much can you cut off a hollow core door Australia?

Your door may require trimming to fit the opening. A maximum of 3mm may be trimmed from any edge.

What are Hume doors made from?

A classic back door design with three styles to choose from. Available in honeycomb core or the option of solid construction. Crafted from tempered hardboard or select timber veneers and offered with a range of glass options to suit your style.

Do you paint the top and bottom of doors?

Note: Don't paint the top or bottom of a door (the narrow parts that aren't visible when the door is closed). Leave them unpainted so the door can expand and contract with changes in humidity.

Why are Hume doors green?

Hume Doors & Timber uses adhesives that have been formally tested for formaldehyde emissions and Volatile Organic Compounds (VOC) as recommended by the Green Building Council and Green Star mark. ... The Green Building Council and the Green Star mark is an internationally-recognised sustainability rating system.

What is Duracote?

Duracote is a preprimed tempered hardboard skin.

What does SPM mean in doors?

Sliced Pacific Maple (SPM) veneer skin to allow for a stained finish.

What is a Pmdf door?

The Corinthian PMDF internal door is a simple flush door built with a CoriTech core for quick and easy installation. It has a premium finish for a superior finish. This Corinthian door is a simple flush door suitable for modern or traditional interior applications. It is lightweight and easy to install.

What are honeycomb doors?

Hollow core door comprises a framed door in filled with structural paper formed into a honeycomb pattern to provide support and rigidity which is glued in place between the door skins. ... The honeycomb shaped inner core material is made from layers of paper or cardboard, bonded together in parallel and uniformly spaced.

What is flush panel door?

A flush door is made of either a solid or hollow core covered with finishing sheets on both sides and often thin pieces of timber on the edges. ... A flush panel door is made of a core (core can either be solid timber or other materials) enveloped with an outer covering of choice materials.

Should doors be satin or semi-gloss?

Semigloss is the best paint finish for interior doors and trim. The reason being, semi-gloss can take up quite an abuse and stand up to nicks and scrapes better than any other sheen, flat or eggshell finish. The large surfaces gather dust just like your furniture.

Should I paint my front door with a brush or roller?

Low-nap and foam rollers are ideal because they leave minimal stippling on the surface. But to achieve a really nice finish, use a paintbrush to lightly brush over the final coat of paint while it's still wet to level out roller marks and leave a smooth “hand-painted” texture.

Can you paint a door while Hung?

Doors can be awkward to remove from their frames, so it's often easier to paint them in place. ... You also don't have to worry about nicking the fresh paint when you re-hang the door. Applying enamel paint to a vertical surface such as a door does make drips more likely to occur.

How much can you cut off a hollow core door?

The recommended amount to cut a hollow core door is up to ¼ inch on each side. However, the actual block size is close to 1 inch on each side. If the block is cut too thin or cut off completely, then a new block should be installed to add structure and prevent moisture damage to the door.

What is a solid internal door?

Solid doors are constructed with a core material, typically some kind of dense timber, before air, cardboard and other materials are helped to cultivate the shape. ... Rather than being solid to their core, semi-solid doors feature a composite that has been cushioned with other materials.

Can you plane a hollow door?

A-Hollow-core doors have solid-wood frames several inches deep, and the edges can be planed moderately if necessary.

How much wood is in a hollow core door?

Hollow core doors have a 3-inch block of wood inside the bottom of the door.