A properly sharpened edge will take off some of your fingernail when scraped against it. A smooth sharp edge will increase the overall carving performance of a snowboard as well as edge hold on hard packed snow and icy conditions. Sharpening the edges helps to keep your board in top shape and give you a smoother ride.

How important are sharp edges on snowboard?

The Importance of Sharp Edges

When boarding, sharp edges are key because they allow you to grip and bite into the slippery snow. Without them, you would have no way to control your board.

Do snowboard edges need to be sharpened?

Sharpening the edges of your snowboard or 'tuning it', is essential for a fun and safe experience on the slopes. ... As a general rule, you should look to get it sharpened once a year, unless you are an avid snowboarder (in which case you may want it sharpened more often).

Can snowboard edges be too sharp?

You ride park, have a more relaxed ride or want a free feeling ride yes edges can be too aggressively sharp. It's all personal preference but most general riders do tend to benefit from a slightly detuned edge as it allows more give and room for error.

How sharp should edges be?

How sharp should my skis be? Your skis edge should be sharp enough to shave tiny bits of your nail when rubbing your nail up and down across the edge. Ski edges should not be as sharper than a butter knife but not as sharp as a dull kitchen knife.

Tips With Nev: How To Tune The Edges Of Your Snowboard

How do you know if your snowboard edges are dull?

If the edge shaves bits of nail off–then it's sharp, if not–then it's dull. Typically the biggest indicator that it's time to service your board or skis is when things don't feel like they're going well anymore while you ride.

How often should I edge my snowboard?

As a general rule, you should sharpen the edges of your snowboard at least once a week. If you snowboard is on the older side, you may have to do it twice a week. Just as I explained with skis, there are two types of sharpening for sharpening the edges of your snowboard.

Do you need to wax and edge a new snowboard?

yes it comes from the factory pre-waxed but its usually not very good quality wax. you do not need to tune/sharpen your edges. this is done from the factory.

What angle should my snowboard edges be?

A standard edge tune is 90 degrees, though for more aggressive carving or hard snow you might opt for 89 degrees or less. (If you're really serious about your edges you can even adjust the angle of the base edge too, though this level of precision is usually the realm of racers).

What does detuning a snowboard mean?

Detuning is dulling or rounding of the edges in selected areas of the tip and tail using a file or stone so that the ski or snowboard is less grabby and doesn't turn in or initiate too quickly. It's often done when the board or skis first come from the factory.

How long do snowboard edges last?

anywhere between 10 minutes to about 10,000 days depending on your conditions. Serious. New edge, on the ice coast, if you skid turn or do alot of sideways plows while you scope out your next line or, take on steeps but arent ready and skid the whole way down, your edge will be shot THAT run.

How often should I hot wax my snowboard?

Generally, you want to hot wax your board every 3 to 4 days of riding. This ensures better glide in varying snow conditions and an overall better performance. Just make sure you're using the right type of wax for the specific conditions.

How do you know when to wax your snowboard?

You can tell when your snowboard needs to be waxed simply by how it feels, as well as how the base looks. If you notice that your board is slowing down, particularly on flat sections, or that the base is looking white and dry then it's probably time to give it the wax treatment.

Is rust on snowboard edges bad?

It is surface rust and not really a big deal. It would maybe become a problem if you left them unused for several seasons and really gave the rust a chance to start rotting into the edges! Otherwise, don't over think this. Go ahead and store it in the bag.

What angle are Burton edges?

All our boards come from the factory with a 1/1 edge tune (89° base of edge). By changing this right angle it's possible to tune your board's performance to suit your riding style or local conditions.

What is base cleaner for snowboards?

Clean Your Base

Use a splash of citrus-based cleaner like One Ball Jay Base Cleaner or Goo Gone, a rag, and some elbow grease to scrub the base clean. Wipe it dry and let it sit for about twenty minutes.

What happens if you don't wax your snowboard?

The problem with never waxing is that the base abrasion builds up to the point where waxing just won't make it better, you'll need a base grind.

Do Burton boards come pre waxed?

Our boards come waxed and ready to ride out of the box. ... It's always a good idea to wax your board after a few days of riding. Remember, speed is your friend.

How often should I get my snowboard waxed and sharpened?

We suggest waxing your snowboard every three or four times that you go riding, and even more often if you are doing it yourself. There are a few ways to check your snowboard's base in order to tell if you need a hot wax. A dry base will start on the edges of the bottom of your snowboard.

Should I tune my snowboard?

In general, it's good to tune your skis after about every 20 days of riding. ... If you are the type of skier or snowboarder who tends to beat your skis up a lot more than the average rider, you might need a tune-up more often. Most experts recommend semi-frequent tune-ups, frequent waxing and regular gear checks.