Gently open the back of the Tempus Fugit Grandfather clock with slip-joint pliers. Examine the spring of the clock to see if it is in working order. Oil the spring in the pivot sections or replace the spring with a new one if it is faulty or too old. Use a small pair of pliers to remove it, if necessary.

How much are Tempus Fugit clocks worth?

These clock usually show a retail price of over $500.00, but actually should sale for about $200.00 or less. We purchased on of these clocks to evaluate and they do look like the images we saw on the web, but much smaller as the bases are really small.

Why won't the pendulum keep swinging?

The reason a clock pendulum often stops swinging, after being moved, is because the clock case now leans at a slightly different angle then it did at its former location. ... A clock is "in beat" when the tick and the tock are evenly spaced.

How do I reset my overwound clock?

Turn the key slowly and just a half turn at a time. Wind it up until it stops. Do not try to force it to wind any further. Even though it is impossible to over-wind your clock, it is also not necessary to wind it until the last possible click of the ratchet.

Can an overwound clock be repaired?

Solutions to overwound clocks

Begin by removing the outer shell of the clock, exposing the mechanism. ... Finally reassemble your clock and wind the clock until the gears do not move any further, this should leave the timepiece working as good as new.

FIXING a grandfather’s clock (weights pulled too far up) removing stubborn weights

Is it possible to Overwind a clock?

Most likely problem: In actual fact it is almost impossible to overwind a clock. Once the coils of a flat mainspring are in firm contact with one another, than the spring can not be physically wound any tighter. The only way to truly overwind a clock spring is to turn it so tightly that the spring actually breaks.

Why does my clock stop working?

When battery operated clocks stop working, it's usually caused by one or more of the batteries. Either a battery has lost its charge, or battery acid has leaked, causing corrosion. Often, the internal mechanisms, such as the cogs, springs and other movements of the clock, are not faulty and are unaffected.

Why does my clock stop at the same time?

a. Pendulum Over Swing--If the bob on the pendulum hasn't first been immobilized or removed from the pendulum arm before the clock is moved, the pendulum can over swing (go past its normal arc) and throw the clock “out of beat.” Then, eventually, the clock will stop.

How do you keep a pendulum swinging?

The pendulum needs to swing exactly equal distances from dead center to the left, as from dead center to the right. If a clock is out of beat, the pendulum will swing for a few minutes, then stop even if the clock case is level.

What causes a pendulum to eventually slow down and stop swinging?

When the swing is raised and released, it will move freely back and forth due to the force of gravity on it. The swing continues moving back and forth without any extra outside help until friction (between the air and the swing and between the chains and the attachment points) slows it down and eventually stops it.

How do you fix a pendulum on a clock?

Stop the pendulum to move the pendulum bob up or down to change the pendulum's effective length. If the clock is running fast, move the bob down or turn the nut to the left. If the clock is running slow, move the bob up or turn the nut to the right. Restart the pendulum and reset the clock hands to the proper time.

How do I make my Tempus Fugit clock work?

Set the time by turning the minute hand clockwise to move forward in time or counterclockwise to go back. Pause at each quarter hour when moving the minute hand clockwise until the clock chimes or you hear a click. Set the moon dial on the clock next by pressing against it while rotating the dial to the right.

What does Tempus fugit?

Tempus fugit is a Latin phrase, usually translated into English as "time flies". ... The phrase is used in both its Latin and English forms as a proverb that "time's a-wasting".

Where is Tempus Fugit made?

It is made in micro-batches by hand at the Matter Distillery in Switzerland following an original, hand-written recipe, purchased by the distillery's original owner in 1930 from a long-closed Italian distillery.

Can you use WD40 on a clock?

USE THE CORRECT OIL

Just like it's not a good idea to cook with motor oil you don't want to oil your clock using the wrong oil. Using substitutes like WD40 can actually damage your clock's movement. ... Brass and steel are used in clocks because when properly lubricated with the right oil it forms a perfect bearing.

Is sewing machine oil the same as clock oil?

Products that you should NEVER use to oil a clock: WD-40, silicone lubricant, kerosene, graphite, sewing machine oil, motor oil, 3 in 1 oil or mineral oil. Clock oil is highly refined oil and it is engineered specifically for clock use .

How do you fix the clock hands not moving?

If the hands on your clock refuse to remain tight, you may need to replace the nut or the clock hands. Push the hour hand against the clock shaft. Friction holds the hour hand on the shaft, and pushing it back onto the shaft will tighten it. Once you tighten the hour hand, rotate it too the correct time.

Is it OK to turn a clock backwards?

There is no set rule, it depends on the clock! So many of my customers are shocked when they see me move the hands backwards on their clocks. ... In the last sixty or seventy years more than 95% of the clocks manufactured have been designed so that you can safely move the minute hand counter-clockwise.

When winding an old clock it is important not to overwrite it?

When winding an old clock, it is important not to overwind it. Overwinding occurs when the mainspring is almost fully wound, but the operator continues to turn the winding key. This causes the main spring to coil too tightly, and might even break it. clocks have changed over the years.