All you have to do is match the size of the spool cap to the size of the spool thread. ... If your spool cap is not the same size as the spool of thread, you can go a little bit smaller for the spool cap size.

Which spool holder do I use?

If you are using a cross wound thread on a horizontal spool pin be sure to use a spool holder (use the size closest to the size of thread spool you are working with). The spool holder will stop the thread from falling off the spool pin when sewing on the machine.

Is a spool cap necessary?

If you are using a horizontal spool pin on your machine (sideways), you need to use a spool cap. A spool cap (sometimes called a spool holder) holds the spool or cone on the pin. ... In fact a jerk can cause the machine to get its thread in a wad.

Can you use a sewing machine without a spool pin?

One of the most simple, yet critical, of these is the spool pin. Although they may vary in design and appearance from one machine to another, the modern sewing machine would not function without this small appendage.

What is a spool cap on a sewing machine?

A spool cap is designed to keep the thread spool on the machine as you sew. ... To keep your thread from catching on the spool cap and breaking, match the size of the spool cap with the size of the thread spool. When in doubt, use a spool cap smaller than the spool.

Christopher Nejman - Tip Of The Day - Spool Caps

What is a spool pin?

: a spool-shaped pin tumbler used in some cylinder locks to foil picking attempts.

What is spool pin felt used for?

The spool pin felt has lots of uses. First, it keeps the noise down as your spool of thread turns. Second, it lets the spool of thread turn smoothly so you do not have any problems. Third, it protects the surface of your sewing machine keeping it free from damage.

Why are there two spool pins on my sewing machine?

One reason could be that you aren't orienting your thread spool in the right direction. There's a reason that sewing machines come with both vertical and horizontal spool pins.

Why are there two spool holders on a sewing machine?

These are made to accommodate the two different types of wound thread spools. What appears to be a more modern recent way of winding, where the thread crisscrosses over itself and makes a pattern on the spool like you usually see on cones of thread (pictured below).

What is bobbin case?

What is a Bobbin Case? As the name implies, a bobbin case is the part of the machine that holds your bobbin when you are sewing.

What is a presser foot?

A presser foot keeps the fabric flat so that it does not rise and fall with the needle and pucker as it is stitched. When especially thick workpieces are to be sewn, such as quilts, a specialized attachment called a walking foot is often used rather than a presser foot.

What is the presser foot used for?

The sewing machine presser foot is the small attachment that usually smoothes and flattens the fabric as it is fed through the machine and stitched. There are lots of different presser feet for all kinds of sewing jobs.

Why does my sewing machine keep getting jammed?

If your bobbin is threaded wrongly, it could cause jamming issues to your sewing machine. Your bobbin thread won't move properly if there are knots or if the bobbin isn't properly wound. Check to see if the threading on your bobbin is all tangled, and fix it if you can.